George Nelson was the design director at Herman Miller from 1945 to 1972, and his influence over three decades is what made the Michigan-based company what it is today. He not only recruited Charles and Ray Eames and Isamu Noguchi but also produced a portfolio of work without which modern design history would be incomplete. His Thin Edge Collection (1952) was first called the Rosewood Case Series, a refined version of the Basic Cabinet Series from 1946. Its striking characteristics include especially thin edges, hence the name. Manufactured today with environmentally sustainable veneers and 85% recycled materials, Thin Edge leverages the latest manufacturing technologies without compromising its original look and feel. This is the authentic Thin Edge Double Dresser by Herman Miller. Made in U.S.A.
Possessing one of the most inventive minds of the 20th century, George Nelson was the rare person who can envision what isn’t there yet. Nelson described his creative abilities as a series of “zaps” – flashes of inspiration and clarity that he turned into innovative design ideas.
One such “zap” came in 1942, when Nelson conceived the first-ever pedestrian shopping mall – ...
Walnut, white ash or santos palisander veneer outer panels with clear-coat finish (except back panel with matte black finish); solid birch drawers; polished aluminum or white powder-coated pulls; polished aluminum legs with leveling floor glides.
Care & Maintenance
With regular care and maintenance, your Herman Miller product will provide many years of superior performance and satisfaction. To maintain quality, please follow the cleaning procedures outlined here.
The instructions for the care and maintenance of Herman Miller products are provided to you as a service. No warranty is implied since results may vary.
Wood & Veneer
Dust regularly with a slightly damp, soft, lint-free cloth. Wipe dry with a dry, soft cloth in the direction of the wood grain.
Once a month
Clean the surface with a soft cloth dampened with a quality cleaner formulated for wood furniture. Wipe the surface in the direction of the wood grain to remove dirt and fingerprints. Wipe dry with a clean, dry cloth.
Twice a year
Apply a good quality furniture polish with a soft cloth.
Do not use aerosol-powered cleaners or polishes. Also, do not use polishes containing waxes or abrasives, or polishes that are oil based.
To reduce the risk of damage, take some precautions:
Use coasters for glasses and mugs. If a glass top is added to the veneer surface, be sure it rests on felt pads. Don’t place a potted plant on a veneer surface unless it’s in a water-tight container or in a drip tray.
Minor repair of water stains and scratches
Rub the surface lightly in the direction of the wood grain using No. 000 steel wool. Apply a scratch-removing polish with a color and value that simulate the veneer. If the scratches are deep, consult a professional furniture refinisher.
Objects should be lifted instead of dragged across a surface. Protective pads should be used under items with a rough bottom, like pottery.
Sunlight can damage veneer as well, so veneer surfaces should not be in direct sunlight.
In addition to light, extremely high or low humidity is a damaging environmental factor. Herman Miller suggests maintaining a relative humidity of 35-65 percent.
Wash coated metal surfaces with a soft cloth soaked in detergent and warm water; rinse thoroughly and dry. Remove scuff marks from low-gloss coatings with pre-softened paste wax, following the instructions on the label. Remove scuff marks and scratches from high-gloss coatings using automotive polishing compounds, either liquid or paste. After polishing, apply a pre-softened automotive paste wax to restore original sheen.
Do not use abrasive, acid, alcohol–based, or solvent–based cleaners; they may damage the paint finish.
Apply a pre-softened paste wax to polished aluminum components following the instructions on the label.
In humid atmospheres near salt water, apply the wax once a month. In other areas, apply wax every three months to maintain the appearance of the aluminum.